Base material×佐藤型鋼製作所 - List of Manufacturers, Suppliers, Companies and Products

Base material Product List

1~3 item / All 3 items

Displayed results

Roof underlayment material

Roof underlayment material

Roof substrate material. 【Features】 ○ Instead of rust-resistant painted C-shaped steel, square steel 100×45 (thickness 0.8mm, 1mm, 1.2mm) is used, which is crimped at the corners. ○ There is a special fitting called Douko (dōen fixing hardware) that can be set onto H steel with a one-touch, no-welding method, significantly shortening the construction period. ○ Our square steel (100×45×0.8, 100×45×1.0, 100×45×1.2) is lighter compared to C-shaped steel (100×50×20×2.3), allowing for an overall reduction in roof weight. Additionally, the straightener method achieves a very flat slope. ○ Since it uses hot-dip galvanized steel sheets, there is no need for painting and no concern about rust. ● For other functions and details, please contact us.

  • Shingle, bark and grass roofs
  • Waterproofing work
  • Roof and gutter construction

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Seismic Smart Ceiling Substrate Material

Corresponds to a specific ceiling with a horizontal seismic intensity of 2.2! Ceiling substrate material that balances workability and strength.

The "Seismic Smart Ceiling" is a lightweight suspended ceiling system that can accommodate a maximum depth of 6 meters, serving as an alternative to steel frame grape trellises. Significant improvements in structural strength have been achieved through enhancements and innovations. It can accommodate specific ceilings with a horizontal seismic intensity of 2.2, and all joints are either bolted or connected with drilling tapping screws, eliminating the need for welding on-site. 【Features】 ■ Maximum depth of up to 6 meters (Seismic Smart Ceiling 5m + conventional ceiling substrate 1m) ■ Lighter compared to steel frame grape trellises (7.4 kg/m² for a depth of 3m) ■ Maximum load capacity improved by approximately 2.5 times ■ Compatible with specific ceilings with a horizontal seismic intensity of 2.2 ■ No welding required on-site *For more details, please refer to the PDF document or feel free to contact us.

  • Renovation and repair methods
  • Steel construction
  • Metallic base

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Exterior wall substrate material

Exterior wall substrate material

This is a substrate material suitable for both interior and exterior use. It is highly precise, low-cost, and quick to install, and it uses galvanized steel sheets for excellent rust prevention. 【Features】 - The precision is significantly better compared to C-shaped steel attachments, and it serves as a substrate material for both interior and exterior use. - It can be fixed to H-beams without welding using dedicated fittings such as Chico (intermediate fixing hardware), Douko (horizontal fixing hardware), and Tango (end fixing hardware), allowing for installation without splicing. - It has strength due to the presence of bracing, offering advantages in cost and construction time reduction. - It is compatible with various exterior panels such as siding, ALC 50mm boards, and metal panels. ● For other functions and details, please contact us.

  • Metal siding
  • ALC
  • Other interior and exterior systems and units

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration